Belden 942 026-001 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 52

Belden 942 026-001 Скачать руководство пользователя страница 20

20

Installation MACH104-PoEP

Release 10 09/2019

This port supports:



Full or half duplex mode

Default setting: Full duplex

1.6.3

1000 Mbit/s F/O port

This port is an SFP slot.
The 1000 Mbit/s F/O port offers you the ability to connect network
components according to the IEEE 802.3 100BASE-SX/1000BASE-LX
standard.
This port supports:



Autonegotiation



Full duplex mode

Delivery state: Autonegotiation activated

1.6.4

10-Gbit/s F/O port

This port is an XFP slot.
The 10 Gbit/s F/O port allows you to connect network components according
to the IEEE 802.3ae 10GBASE-SR/LR standard.



Full duplex mode

Default setting: Full duplex

1.6.5

PoE ports

Note:

Connect only PoE-supplier devices whose data connections are

located in the interior of the building and are specified as SELV circuits.

Further information:

See “10/100/1000 Mbit/s twisted pair port” on page 19.

Some twisted-pair ports support Power over Ethernet (PoE):

The PoE ports support the connection and a remote power supply of (for
example) IP phones (Voice-over-IP), webcams, sensors, print servers, and
WLAN access points. With PoE, these end devices are powered via the
twisted pair cable.

Ports

PoE support

1 to 4

No

5 to 20

Yes

Table 8:

Twisted-pair ports and PoE support

«
...
18
19
20
21
22
...
»

Содержание 942 026-001





















































Отзывы:

Нет отзывов