Belden 934 691-001, Техническое руководство

Страница: 24 / 68

Assembly and wiring
24
4.3 Port assignments
Technical manual LioN-P/ -R EtherNet/IP
Release 1.4 02/2016
4.3.3 Connections for power supply, 7/8", 5-pin (only
applies to multiprotocol)
 Color coding: gray
Figure 4: Schematic drawing, port X03 (IN)
Figure 5: Schematic drawing, port X04 (OUT)
Port Pin Signal Function
0980 ESL 801 0980 ESL 802
0980 ESL 803
Power supply
X03, X04 1 *see note Actuator GND (0V)
2 GND (0V) System/sensors GND (0V)
3 FE Ground Functional ground
4 +24 V System/sensors U
S
+24 V
5 *see note Actuator V
L
(+24 V)
Table 5: Assignment of ports X03, X04
NOTE
For the input module 0980 ESL 801, the two contacts 1 and 5 are not
required for the power supply to the actuators. However, these two contacts
are connected to each other on the connector and socket side to enable 5-
pin transmission of the power supply to a downstream module.