Belden 1RU32LCD-BK-K Скачать руководство пользователя страница 228

Страница: 228 / 269

206

Operation

Protect a Destination - XY

2 Select as many destinations as required. A selected destination flashes.



(If the required destinations are not on the current page use the

Destination

Page Up

and

Page Down

to navigate to the right pages, and select the destinations.)

Fig. 7-6: Gang Take Selected Destinations (LCD panel shown)

3 Press the

Take

button to make all the new routes.

All the new routes are made.

Protect a Destination - XY

Protect

To protect a destination:

1 Select the destination.

If the destination is already protected:

• the destination button color indicates that the destination is protected; and

• the

Protect

button color indicates that the destination is protected (and on an LCD

panel will show the device ID of the panel/device that has protected that
destination).

2 If the destination is not already protected, then to protect the destination



press the

Protect

button.

The destination button changes color (and, on an LCD panel, it displays a padlock

Note:

Pressing the current Source button, or pressing

Source Page Up

Source Page Down

buttons exits

Gang Take

mode.

Note:

Any existing destinations fed by the selected source will be
highlighted in the panel.

Note:

If the

Take

button has not been enabled, then routes are

automatically made upon selection of the destinations.

Selected source

Selected destinations



(Flash until routing is Taken)

Possible existing destination



(No flashing)

Содержание 1RU32LCD-BK-K














































































































































































































































































Результаты поиска

Содержание 1RU32LCD-BK-K

Отзывы:

Похожие инструкции для 1RU32LCD-BK-K

Бренды по названию

Популярные бренды

Belden 1RU32LCD-BK-K, Руководство пользователя

Результаты поиска

Содержание 1RU32LCD-BK-K

Отзывы:

Похожие инструкции для 1RU32LCD-BK-K

Бренды по названию

Популярные бренды