Belden 1RU32LCD-BK-K Скачать руководство пользователя страница 171

Страница: 171 / 269

149

G2 Series 1U Router Control Panel

User Manual

Tab. 5-49: Customizable LED Colors - XY

Button State

Button Color Description

Source

Source button.

New Source

Pre-selected new source.

Destination

Destination button.

Protected Destination

Destination is protected. I.e. the route to it is protected,
either by this panel or another panel/device.

Selected Destination /
Protect Inactive

The selected destination.

Selected Destination /
Protect Active

The selected destination is protected.

Routed Source

Source currently routed to the selected destination.

Text Buttons

Color for buttons assigned to display free text.

Unmarried Selected
Destination

Selected destination is unmarried.
(I.e. It is part of a destination group, but has different
routing, for some reason.)

Salvo Active

Salvo is active or has recently completed.

Salvo Inactive

Salvo is inactive.

Monitor Port

Monitor port button.

Source not Mapped at
Level

Source is not present in the selected router level (applies
to a multi-level system).

Destination not Mapped
at Level

Destination is not present in the selected router level
(applies to a multi-level system).

Содержание 1RU32LCD-BK-K














































































































































































































































































Результаты поиска

Содержание 1RU32LCD-BK-K

Отзывы:

Belden 1RU32LCD-BK-K, Руководство пользователя, Страница: 171 / 269

Результаты поиска

Содержание 1RU32LCD-BK-K

Отзывы: