Features :
Passive
Frequency Response :
20Hz ~ 20KHz
Volume :
A500K
Ω
Pick-up :
Piezo Ceramic pick-up
Dimension :
W 46mm X H 71mm
(1.8" X 2.8")
- The jack should be pluged for proper Preamp working.
(TUNER will works regardless pluging jack)
- There is no output sound, please check if tuner or mute is turned on.
- When LCD screen is dim or no display, please check battery life.
- To prevent battery loss, please unplug jack when preamp is not in use.
- Do not disassemble for repair.
Return to your dealer for service or repair.
- Do not use too much force when operating the control.
3
4
1
2
Functions
PS-2000 PREAMP USER’S MANUAL
Passive Tone Control
Specification
Caution
1. Volume Knob
The VOLUME controls the output volume. Turned fully counter-clockwise it is
completely OFF. Turned fully clockwise it is LOUD!
2. Tone
EQ TONE CONTROL
the center detent on these tone control yield a flat tone response.
“+10” boosts the tone; “-10” cuts the tone.
Battery
A 9-volt battery powers the PS-2000 preamp. Before connecting the
instrument to an amplifier or mixer please check that a fully charged 9-volt
battery is connected.
2. Tone
1. Volume
2
Tone
Vol.
Passive Tone
Control
+10
+10
-10
0
5
0
1
