Belanger Top Wheel Mix & Match, Руководство пользователя

Страница: 54 / 80

TOP WHEEL
Mix and Match
50
Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681
1MANUL749
Maintenance
General Repairs
Bearing / Shaft Replacement
The best method to capture a bearing is by properly tightening it in position. When tightening a
bearing assembly an adequate amount of torque needs to be applied to ensure that the bearing
is securely captured.
When replacing or performing maintenance that requires disassembling the Top Wheel Drive
Bearing follow the instruction below to ensure the bearing is securely captured.
Due to the amount of force applied when tightening to 120 ft/lb. (162.7 Nm) we recommend
replacing the 3/4-16 x 1-
1/2” bolt whenever the drive bearing assembly requires maintenance or
is disassembled.
Drive Bearing Replacement
1) Install new bearing, using two of the three 1/2-13 X 1
” bolts to secure the bearing to the
driver-side arm.
2) Temporarily install a 1/2-13 x 3-1
/2” bolt to prevent the bearing from spinning during the
torque process.
3) Secure the parts into place as shown below. Apply Red L
octite® 271™ on the threads of
the 3/4-16 x 1-
1/2” bolt.
3/4-16 x 1- 1/2” bolt
(Apply red Loctite®
27 1™)
3/4” (19 mm) flat
washer
Drive Shaft
1/2” (12.7 mm) thick spacer
3/4” (19 mm) lock washer
Insert 3- 1/2” (89 mm) bolt