Belair F1K0, Руководство пользователя

Страница: 10 / 30

CONFIGURING THE DSP
The AMPLIFIER contains a digital signal processor (DSP) that is used to control the audio
signal from the source (e.g mixer) to the loudspeakers.
The DSP performs the following principal functions:
●
Volume control
●
Signal routing
●
EQ
●
Crossover
●
Compression/Limiting
The DSP is configured using the miniDSP 2x4 HD app. This can be downloaded from
minidsp.com for MacOS and Windows at the following address:
https://www.minidsp.com/products/plugins/2x4-hd-plugins/2x4hd1-detail
This manual gives an overview of the most important functions of the DSP; a full
description can be found at the following address:
https://www.minidsp.com/products/minidsp-in-a-box/minidsp-2x4-hd
Connecting to the DSP
Install and open the miniDSP 2x4-HD app on your computer.
With the AMPLIFIER on, connect your computer to the front panel USB connector using the
supplied cable USB-A to USB-B cable.
Click ‘Connect’, located in the top right corner.
A dialog box will open to confirm successful connection.
If the below dialog box appears, ensure that all audio inputs are muted or very low before
selecting ‘Synchronize Config’ or ‘Restore Config’.
User Manual R1.0
10 / 30