14 / EN
Table Blender / User Manual
3
Operation
3.5 “P” position
The process of 1-2 seconds operation in the position "P" on the speed
adjustment button (7) is called "PULSE".
For high speed mixing with short strokes, keep the speed adjustment knob
(7) in the "P" position. When you release the button, the speed adjustment
knob (7) automatically returns to the "OFF" position and the device starts
to stop.
3.6 Tips for blending
1. To add ice cubes to the mixes while the blender is running, dispose of
one ice cube at a time by removing the measuring cap (1). To make the
blender mix the ice properly, wait for a few seconds before adding the
next ice cube.
2. To add more food, remove the measuring cap (1) and insert the
ingredients through the hole. Make sure the food is cut to a size of 2-5
cm to fit through the hole. Put back the cap (1) when you have finished
adding ingredients.
3. While blending solid food like raw vegetables, cooked or raw meat, and
fruits, always cut these materials into pieces of 2-5 cm length before
putting them in the glass container (3). Do not put more than 2 units
of such food at once in the blender. This will speed up the blending
process and reduce the abrasion on the blender blades (8).
4. Unless otherwise described in the recipe, always add the liquid
ingredient in the glass container (3) first.
5. To blend a drink, put all ingredients in the glass container (3) at once.
6. Avoid over-blending. It is usually enough to blend for a few seconds.
7. Over-blending turns food into mush.
