Beko METPOINT BDL compact, Инструкция по установке и эксплуатации

Страница: 83 / 118

EN Installation and operating manual
METPOINT
®
BDL compact 83
11.2.7.5. Resolution of decimal places – labelling and recording data values
Home  Settings  Sensor-settings  Virtual channels  V1  Tool button
Press the Tool button to view the Resolution for
decimal places, the Short name and the Value name .
Press the Record button to record and store the
selected data on the activated data logger.
For the Value to be recorded, enter a Name with
max. 10 characters. This name is then used in the
Charts and Chart/current values menus.
Otherwise, the default designation (e.g. V1a ) is
displayed.
V1 indicates the channel; a is the first value in the
channel, b would be the second, and c the third.
To adjust the Resolution of the decimal places, touch
the arrow buttons (0 to 5 decimals places).
Home  Settings  Sensor-settings  Virtual channels  V1  Record button
Press the Record buttons to select the
measurements to be recorded and stored on the
activated data logger.
Caution:
Prior to recording the selected measuring data, configure the data logger and then start it (see chapter 11.4 Logger
settings (data logger)).
See also chapters 11.2.2.2 Labelling measurements and 11.2.2.3 Recording measuring data.