Beko METPOINT BDL compact, Инструкция по установке и эксплуатации

Страница: 53 / 118

EN Installation and operating manual
METPOINT
®
BDL compact 53
11.2.2.7. Labelling and configuring text fields
Home  Settings  Sensor settings  A1
If the data logger is activated, the following window
appears. Press
Yes to activate the data logger.
(Data loggers are only activated if the relevant settings
and recordings have been configured.)
Note:
Before entering or changing sensor settings, set
the data logger to
STOP .
Home

Settings

Sensor settings

A1

right arrow (2. page)
To enter or change a value, touch a white field.
The Alarm (see chapter 11.2.2.4 Alarm settings) and Record buttons (see chapter 11.2.2.3 Recording measuring data),
the Resolution for digital places and the Short name and the Value name (see chapter 11.2.2.2 Labelling measurements
and defining resolution), as well as the Advanced settings (see chapter11.2.2.5 Advanced settings) are described in
chapter11.2.2 Sensor settings.
Home  Settings  Sensor-settings  A1  Name
Field names must not be longer than 24 characters.