38
USA
•
Machine is unloaded right after the program is over. >>> Do not unload your
machine right after washing process is completed. Slightly open the door and wait
for evacuation of the steam inside for a while. Unload the dishes after the pieces
cool down to a touchable level. Start unloading process from the lower basket. Thus,
dropping of water remained on a piece at upper basket onto the pieces at lower
basket is prevented.
•
Selected program is unsuitable. >>> Since rinsing temperature is low at program
with short duration, drying performance will also be low. Select program with longer
duration for a higher drying performance.
•
Surface quality of the kitchen utensils is deteriorated. >>> Desired washing
performance can not be obtained at kitchen utensils with deteriorated surfaces and
it is not suitable to use such utensils in terms of hygiene as well. Also, water can not
flow easily on deteriorated surfaces. It is not recommended to wash such kitchen
utensils in dishwasher.
C
It is normal that drying complaints can be experienced with Teflon kitchen
utensils. It is associated with the structure of Teflon. Since the surface
tensions of Teflon and water are different, water droplets will remain as
beads on the Teflon surface.
Stains remaining on dishes when cycle has completed.
•
Selected program is unsuitable. >>> Select a program with a higher temperature and
cycle time.
•
Surface quality of the kitchen utensils is deteriorated. >>> Tea and coffee stains
or other dye spots may not be cleaned in dishwasher when they have penetrated
in deteriorated surfaces. Desired washing performance can not be obtained at
kitchen utensils with deteriorated surfaces and it is not suitable to use such utensils
in terms of hygiene as well. It is not recommended to wash such kitchen utensils in
dishwasher.
•
Detergent is stored under unsuitable conditions. >>> If you are using powder
detergent, do not store the detergent package in humid places. Keep it in a closed
container if possible. For ease-of-storing, we recommend you to use tablet
detergents.
Lime traces remain on dishes and glassware gains a misty appearance
•
Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if
necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the
machine.
•
Water hardness setting is low or salt level is insufficient >>> Measure the hardness
of the supply water appropriately and check the water hardness setting.
•
Salt leakage exists. >>> Pay attention not to spill salt around the salt filling hole
while adding salt. Make sure that the salt reservoir lid is tightly closed after finishing
the filling process. Run the prewash program to remove the salt that spilled inside
the machine. Since the salt granules that will remain under the lid will dissolve during
prewash, causing the lid loosen, check the lid once again at the end of the program.
Содержание DUT25401B
Страница 48: ......
