Beko DUT25400B страница 6 Скачать руководство пользователя

Страница: 6 / 45

USA

2. INSTALLATION

WARNING:

When installing

the dishwasher, follow basic

precautions, including the

following:

Please check the standarts and local codes

for placement of machine.

•

Installation, maintenance and repair

should be performed by a qualified

installer. Work by unqualified persons

could be dangerous and may void the

warranty.

•

Do not operate the appliance if

damaged, malfunctioning, partially

disassembled or if it has missing or

broken parts.

•

Before installation or service,

disconnect the power supply to

the work area by unplugging the

unit, “tripping” the circuit breaker or

removing the fuse.

•

Only connect the dishwasher to the

power supply when all installation and

plumbing work is complete.

•

Never connect the ground wire to gas

lines, or hot water pipes, plumbing

lines.

•

Do not install or store the dishwasher

where it can be exposed to below

freezing temperatures or exposed to

weather.

•

Dishwasher must be secured to

adjacent cabinetry using the brackets

provided. Failure to do this may cause

damage to property or bodily injury.

•

Connect to a properly rated, protected

and sized power supply circuit to avoid

electrical overload. The dishwasher

is designed for an electrical supply

of 120 V (volts), 60 Hz (hertz), AC,

connected to a dishwasher-dedicated,

properly grounded electrical circuit

with a fuse or breakers rated for 15

amperes. Electrical supply conductors

shall be a minimum of # 16 AWG

copper wire rated at 75 °C (167 °F) or

higher. These requirements must be

met to prevent injury and machine

damage. Consult a qualified electrician

if in doubt.

•

Do not use any extension cord or

portable outlet device to connect the

dishwasher to a power supply.

WARNING:

Danger of

suffocation! Ensure that any

plastic wrappings, bags, small

pieces etc. are disposed of

safely and kept out of the reach

of children.

Содержание DUT25400B














































Результаты поиска

Содержание DUT25400B

Отзывы:

Похожие инструкции для DUT25400B

Бренды по названию

Популярные бренды

Beko DUT25400B, Руководство пользователя

Результаты поиска

Содержание DUT25400B

Отзывы:

Похожие инструкции для DUT25400B

Бренды по названию

Популярные бренды