25
EN
b
Drying Step Indicator (
15 b
)
c
End of Program Indicator (
15 c
)
The display shows the steps for
washing
15 a
and drying
15 b
,
respectively, while the selected
program is running. Only the End of
Program indicator
15 c
lights up when
the program is over. Remaining Time
Indicator (
3
) displays “0:00”.
Canceling a Program
Press Start / Pause / Cancel button (
2
)
for three seconds to cancel a program
that is already running. Release
the button when symbol (
12
) start
flashing in the display. For a couple
of minutes the machine will fulfill the
necessary operations required for
cancellation. Remaining time indicator
(
11
) displays “0:00”. You may select
and operate a new program following
the program cancellation process.
There might be residues of detergent
or rinse aid left in the machine and/or
on the pieces being washed depending
on the step the previous program was
in at the time of such cancellation.
Programming the Delayed
Start
You can delay the start of the selected
program until 9 hours. Delayed start
can not be set after the program starts.
The selected program must not be
started in order to be able to set the
delay time.
Delayed start indicator sand glass
(
13
) will start flashing when the
delayed start button (
6
) is pressed. You
can set the desired time by pressing
the delayed start button (
6
). Press the
Start / Pause / Cancel button (
2
) after
setting the time. The delayed start
indicator sand glass (
13
) and play
icon (
12
) will remain lit on the display
during the delayed start countdown
and the delay time indicator (
11
) will
display the remaining time. Program
will start automatically when the
countdown is over.
You can use the delayed start function
if you are utilizing the economic
electricity tariff.
If you want to change the program
or functions while the delayed start
function is enabled, then pause the
machine by pressing the Start / Pause
/ Cancel button (
2
). You will see that
the countdown stops. The delayed start
indicator
will start flashing. Select the
new program and/or add the functions
as described in
Program Selection
and Table of Average Consumption
Values
. Resume the delayed start
countdown by pressing the Start /
Pause / Cancel button (
2
).
If you want to cancel delayed start
countdown while it is in progress,
then press the Start / Pause / Cancel
button (
2
) for three seconds. Release
the button when symbols (
12
) start
flashing in the display. For a couple
of minutes the machine will fulfill
the necessary operations required
for cancellation. Remaining time
indicator (
11
) displays “0:00”. You may
select and operate a new program
following the delayed start countdown
cancellation process.
