Beko DRX732W, Руководство пользователя

Страница: 49 / 60

49 / EN
Dryer / User Manual
Operating the product
5.5 Auxiliary functions
Buzzer / time
Drying machine makes an audible warning
when the program is completed. If you
don’t want the machine to make an audible
warning, press the “Buzzer / Time” button.
When you press the Buzzer/Time button, a
light will illuminate and no audible warning
will be made when the program ends.
C
You can select this function
before or after the program
starts.
Buzzer/Time button is used to adjust
program duration while the Rack/Time
programs are selected.
Drying Level
Drying Level button is used for adjusting to
desired dryness level. Program duration may
change depending on the selection.
C
You can activate this function
only prior to start of program.
End time
You can delay the end time of the program up
to 24 hours with End time function.
1. Open the loading door and place the
laundry.
2. Select the drying program.
3. Press the End Time selection button and
set the delay time you wish. End Time
LED will illuminate. (When pressed and
hold the button, End Time proceeds non-
stop).
4. Press the Start / Stand-by button. End
Time countdown starts. “:” Separator
in the middle of displayed delay time
flashes.
C
You can add or remove laundry
within end time. Displayed time
is the sum of normal drying time
and end time. End Time LED will
turn off at the end of countdown,
drying starts and drying LED will
illuminate.
Changing the end time
If you want to change the duration during
the countdown:
Cancel the program by turning the On/Off/
Program selection knob. Select the program
you want and repeat the End Time selection
process.
Cancelling the end time function
If you want to cancel the end time
countdown and start the program
immediately:
Cancel the program by turning the On/Off/
Program selection knob. Select the program
you want and press the Start/Stand-by
button.
5.6 Warning indicators
C
Warning indicators may vary
depending on the model of your
dryer.
Filter cleaning
When the program is completed, the warning
indicator for filter cleaning turns on.
Water tank
When the program is completed, the warning
indicator to empty the water tank turns on.
If the water tank fills up while the program
continues, the warning indicator starts
flashing and the machine goes into stand-by.
In this case, empty the water tank and start
the program by pressing the Start / Stand-
by button. Warning indicator turns off and
program resumes.
5.7 Starting the program
Press the Start/Stand-by button to start the
program.
Start/Stand-by and Drying indicators will
illuminate to indicate that program started.