background image

14

Dishwasher / User’s Manual

/41 EN

Preparation

C

Salt reservoir will be filled with 

water when you start the 

product.  For this reason, add salt 

before operating the machine.

1.  Firstly, take the lower basket out to add 

softening salt.

2.  Turn the salt reservoir lid counter-

clockwise to open it (A).

3.   Add 1 litre of water to salt reservoir of 

your machine only in initial use.

4.  Fill the salt reservoir with salt by 

using the salt funnel (D). To speed up 

dissolution rate of salt in water, stir it 

with a spoon.

C

You can put about 2 kg of 

softening salt into the salt 

reservoir.

5.  Replace the lid and tighten it when the 

reservoir is full.

If the hardness level of the supply water 

is above 90 °dF or if you are using well 

water, then it is recommended to use water 

purification devices and special filters.

If the hardness level of the supply water is 

below 13°dF, there is no need to use salt 

in your dishwasher. If this is the case, “No 

Salt Warning Indicator” (if any) illuminates 

continuously on the panel of your machine.

If the water hardness level adjustment is set 

to level 1, the “No salt warning indicator” will 

illuminate continuously although it is not 

necessary to use salt. If you use salt under 

this condition, salt will not be consumed and 

the Salt indicator will not illuminate.

C

If you move your house, it is 

necessary to readjust water 

hardness level of your machine 

by considering the information 

given above according to the 

hardness level of the supply 

water in your new location. 

Your machine will display the 

most recently adjusted water 

hardness level.

Adding salt

Water softening system needs to be 

regenerated in order for the product operates 

with the same performance continuously.  

Dishwasher salt is used for this purpose. 

C

Use only special softening salts 

produced particularly for the 

dishwashers in your machine.

C

It is recommended to use 

granule- or powder-formed 

softening salts in the water 

softening system. Do not use 

salts that do not completely 

dissolve in water such as table 

salt or rock salt.  Otherwise the 

performance of the system may 

deteriorate in time.

Содержание DFS28123X












































Отзывы: