background image

Dishwasher / User’s Manual

11 / 44 EN

Installation

 

The voltage and allowed fuse or breaker 

protection are specified in the “Technical 

specifications” section. If the current 

value of the fuse or breaker in the house 

is less than 16 Amps, have a qualified 

electrician install a 16 Amp fuse.

 

The specified voltage must be equal to 

your mains voltage.

 

Do not make connections via extension 

cables or multi-plugs.

B

Damaged power cables must 

be replaced by the Authorised 

Service Agent.

B

If your dishwasher is equipped 

with internal illumination, lamp 

should only be replaced by the 

Authorised Service Agent in 

case of failures that may occur 

on the lamp.

B

If the product has a failure, it 

should not be operated unless 

it is repaired by the Authorised 

Service Agent! There is the risk 

of electric shock!

Initial use

Before starting to use the product, make sure 

that all preparations are made in accordance 

with the instructions in sections “Important 

safety instructions” and “Installation”.

 

To prepare the product to do the dishes, 

perform first operation in the shortest 

programme with detergent while the 

machine is empty. During the initial use, 

fill the salt reservoir with 1 litre of water 

prior to filling it with salt.

A

There might be a small amount 

of water left in the product 

after factory quality control 

tests. This has no harm on the 

product.

(depends on model)

The A system protects against 

water leaks that may occur at the hose 

inlet.Water contact with the valve box of 

the system must be avoided to prevent 

damage to the electrical system. If the 

A system is damaged, unplug the 

product and call the Authorised Service 

Agent. 

A

As the hose set contains 

electrical connections and 

assemblies, never shorten 

or lengthen the hose with 

extension hoses.

Electrical connection

Connect the product to a grounded outlet 

protected by a fuse complying with the 

values in the “Technical specifications” 

table. Our company shall not be liable for 

any damages that will arise when the 

product is used without grounding in 

accordance with the local regulations.

 

Connection must comply with national 

regulations.

 

Power cable plug must be within easy 

reach after installation.

B

Unplug the product after the 

washing programme is over.

Содержание DFN28430B















































Отзывы: