QUICK REFERENCE GUIDE
EN
How to use your dishwasher:
•
Open the water tap.
•
Plug to the mains.
•
Open the door and load the dishwasher. Check if both upper
and lower spray arms move freely.
•
Fill enough detergent into the detergent dispenser and close
the door.
•
Check the salt and rinse aid level indicator lights. If
necessary, refill salt and/or rinse aid.
•
Use the on / off / programme selection knob to choose your
washing programme.
•
Start the programme with the Start/Cancel button:
Attention
Avoid opening the door during the washing process. This interrupts
the washing process, and hot steam will escape. When the door is
closed, the programme will continue.
•
Use the on / off / programme selection key to turn the machine
off again. When the progress indicator light “programme end”
lights up, the programme is complete.
•
Close the water tap. Pull out the plug.
•
Allow your dishes to cool for 15 minutes, with the door open.
Unload the dishes. Begin with the lower basket.
! Attention:
Please read the operating manual prior to operating the machine for the first time.
Salt level indicator
light
5
6
7
2
1
3
4
Half Load (1/2)
On/Off/Programme
selection Knob
Start/Cancel Key
“ON” indicator light
LED progress indicator
lights
6
7
Rinse aid level
indicator light
Programme Table
Programme number
1Reference*
2
3
4
5
Programme name
Cleaning temperature
Degree of Soiling
Most economical washing
program for the medium soiled
daily dishes that are kept
waiting.
Suitable for heavily soiled dishes,
pots and pans.
Daily washing program for
normally soiled dishes.
Daily washing program at which
the medium soiled dishes that are
kept waiting are cleaned in the
fastest way.
Suitable for lightly soiled daily
dishes that are scraped or pre-
cleaned.
Medium
High
Medium
Medium
Few
Detergents
A=25 cm³/15 cm³ B=5 cm³
A+B
A+B
A+B
A+B
A
Programme sequence
(without options)
Pre-wash
▼
Wash
▼
Cold rinse
▼
Hot Rinse
▼
Dry
▼
End
Pre-wash
▼
Wash
▼
Cold rinse
▼
Hot Rinse
▼
Dry
▼
End
Wash
▼
Cold rinse
▼
Hot Rinse
▼
Dry
▼
End
Wash
▼
Cold rinse
▼
Hot Rinse
▼
Dry
▼
End
Wash
▼
Cold rinse
▼
Hot Rinse
▼
End
Duration (min)
192
124
90
58
30
Water (I)
14,0
17,6
11,8
11,8
11,8
Energy (kWh)
1,02
1,70
1,24
1,32
0,79
The consumption values shown in the table were determined under standard conditions. Differences may therefore occur under practical conditions.
* Reference programme for testing institutes The tests in accordance with EN 50242 must be carried out with a full water softener salt dispenser and a full rinse aid reservoir, and using the test programme.
Quick & Clean
Intensive
Clean & Shine
50°C
70°C
70°C
65°C
35°C
30min.