Dishwasher / User’s Manual
17 / 53
EN
PreparatIon
Installing/Removing the Liquid/
Gel Detergent and Rinse Aid Box
Top remove the rinse aid and detergent
boxes, push and lift the system cover on
both sides as shown with arrows 1 and 2 and
open.
1
2
1
Lift and remove the rinse aid box (A).
A
B
1
2
Move the detergent box (B) in the direction
of the arrow (1) and lift to remove (2). Once
the cleaning or filling procedure is complete,
follow the above steps in reverse order to
re-install the detergent and rinse aid boxes.
Powder Detergents
C
You can find the correct amount
of powder detergent for the
selected programme in the
table "Programme Data and
Consumption Values".
C
You can apply powder
detergent onto the cover of the
dishwasher or directly into the
machine.
the control panel. Then you can use
powder, tablet or liquid/gel detergent.
C
Use only liquid/gel detergent
suitable for the dishwasher.
A
Do not mix different brands of
liquid/gel detergents.
C
Do not fill the liquid/gel
detergent box with liquids or
chemical cleaners (vinegar,
bleacher etc.) other than liquid/
gel detergent.
C
Liquid/gel detergents that lost
their fluidity and became firm
must not be used in automatic
liquid/gel detergent dosing
system.
Liquid/gel detergents must be used
in a short time once they have been
unpacked. Unpacked liquid/gel
detergents may lose their fluidity in
time.
C
If a different brand or type of
liquid/gel detergent will be used,
make sure previous detergent
is depleted completely and then
remove and clean the liquid/gel
detergent tank under tap water.
C
Fill the rinse air box only with
rinse aid, and the detergent box
only with liquid/gel detergent.
If you fill it inappropriately,
immediately remove the boxes,
empty them and clean under
running water.
