21
USA
6.4 AUXILIARY FUNCTIONS
Washing programs of your dishwasher are
designed to obtain the best cleaning effect,
considering the type of the soiling, soiling
degree and properties of the dishes to be
washed.
Auxiliary functions allow you save from
time, water and power.
C
Auxiliary functions may cause
changes in the program
duration.
C
Auxiliary functions are not
suitable for all washing
programs. Indicator of the
auxiliary function that is not
compatible with the program
will not be active.
AquaIntense Function
AquaIntense impeller
located under the
lower impeller helps
washing your heavily
soiled dishes places in
the right side of the
lower basket. It will give better results to
place the most soiled dish to the right front
side.
C
Do not try to remove the
AquaIntense impeller!
Fast Function
It shortens the time of the washing cycle
selected and decreases water consumption
by enabling washing under higher pressure.
SteamGloss Function
It provides superior drying performance.
Sanitize Function
Sanitize function raises the water
temperature in the final rinse to meet the
requirements of NSF/ANSI STANDARD
184 for Residential Dishwashers. Certified
residential dishwashers are not intended
for licensed food establishments.
C
At the end of a succesfull
sanitization “SAN“ is displayed
on the display. “SAN” is not
displayed on the display if the
cycle is interrupted or the water
could not be heated to the
required temperature.
C
Available programs are
indicated on Program Table
chart.
C
Note: Only sanitizing cycles
have been designed to meet
the requirements of NSF/ANSI
Standard 184 for soil removal
and sanitization efficacy.
There is no intention, either
directly or indirectly, that all
cycles have passed sanitization
performance tests.
Half Load function
It is used to operate the machine without
loading it completely.
1. Load your dishes in the machine as you
like. You can use both upper and lower
racks.
2. Turn the machine on with On/Off key.
3. Select the desired program and press
the Half Load key. The Half Load
indicator will light on the display in the
Function Selected indicator.
4. Close the door of the machine to start
the program.