Beko DDT29430X страница 27 Скачать руководство пользователя

Страница: 27 / 46

USA

6.9 Salt indicator ( )

Please check the salt indicator on the

display to see whether there is adequate

amount of softening salt in the dishwasher

or not. You need to refill the salt reservoir

with salt whenever salt warning indicator

appears on the display of your machine.

Adjusting the water hardness

level is explained in Water

Softening System section.

6.10 Rinse Aid indicator ( )

Please check the rinse aid indicator on the

display to see whether there is adequate

amount of rinse aid in the dishwasher or

not. You need to refill the rinse aid reservoir

with rinse aid whenever rinse aid warning

indicator appears on the display of your

machine.

6.11 END OF PROGRAMME

End of Programme indicator will light up

once the washing programme is over.

1. Press the On/Off button to turn off

your machine.

2. Close the tap.
3. Unplug the machine from the socket.

For energy saving, the product

is automatically turned off

following the completion of the

programme or if the programme

is not started.

Leave your dishes in the

machine for about 15 minutes

to cool down after they are

washed. Your dishes will dry

in a shorter time if you leave

the door of your machine

ajar during this period. This

process will increase the drying

effectiveness of your machine.

InnerClean

This programme is recommended to be

operated on each 1-2 months for machine

cleaning and necessary hygiene. The

programme should be operated while the

machine is empty.

In order to achieve an efficient result, it is

recommended to use together with special

machine cleaning agents.

Do not use this programme to

clean dishes. As it operates in

high temperatures, it is harmful

for the dishes.

6.12 WATER CUT-OFF

WARNING

If mains water is cut or water inlet tap

is turned off the machine cannot take

water in and E:02 icon will flash on the

programme indicator. As long as the

problem continues, washing programme

is paused and the water inlet is checked

regularly by the machine; when the water

is restored E:02 icon will disappear after

a while and the washing programme

resumes.

6.13 OVERFLOWING

WARNING

If the machine intakes too much water or

there is leakage at any of the components

then the machine will detect this and E:01

icon will flash on the Programme indicator.

As long as the overflowing continues

safety algorithm will be active and try

to discharge the water. If overflowing

stops and safety is assured, E:01 icon

will disappear. If E:01 does not disappear,

there is a permanent fault. In this case the

authorised service should be contacted.

Содержание DDT29430X















































Результаты поиска

Содержание DDT29430X

Отзывы:

Похожие инструкции для DDT29430X

Бренды по названию

Популярные бренды

Beko DDT29430X, Руководство пользователя

Результаты поиска

Содержание DDT29430X

Отзывы:

Похожие инструкции для DDT29430X

Бренды по названию

Популярные бренды