CLEARPOINT® Flanged L100-L304_us_en_2014-6 (rev. A)
5
RECEIVING AND TRANSPORTING
CLEARPOINT®
filters undergo stringent quality control procedures in the manufacturing plant and are handed
over to the forwarding agent in perfect condition. Upon arrival of the goods, please check for any visible
damage and, where appropriate, insist on a corresponding note on the delivery receipt. Contact the forwarding
agent and arrange for an assessment of the damage. The manufacturer is not responsible for any damage
caused during transport.
After verification of the packaging upon receipt, place the unit as close as possible to the installation point
before unpacking the contents
.
To move the packaged unit, we suggest the use of a suitable crane or forklift. We do not recommend
moving the unit by any hand operated or manual mechanism.
Handle with care. Heavy blows could cause irreparable damage.
Even when packaged, keep the unit protected from severe weather.
The packaging materials are recyclable. Each material must be properly disposed in a manner complying with
the rules and regulations of the local municipal government.
SAFETY RULES
•
The personnel carrying out the installation, commissioning, maintenance or repair of the unit must be properly
qualified for this type of work. In particular, the persons concerned should
Be trained and familiar with handling compressed- air systems and be informed about the associated
dangers.
For CLEARPOINT® filters equipped with a BEKOMAT® drain, the BEKOMAT® operating manual must
also be read, understood and respected.
Know the content of the relevant instructions for installation and operation, and
Possess vocational qualifications or entitlements in this particular field of work.
•
Before the start of any work, the housing must first be depressurized.
•
In the case the
CLEARPOINT®
filters with BEKOMAT® drains all the rules of the separated instructions need to be
complied with as well.
•
To ensure safe functioning, only use the unit within the operational limits (operating pressure, operating
temperature, volumetric flow, and material stability).
•
Where a BEKOMAT® is installed, it must be ensured the unit is designed for the stated volumetric flow of the
compressed air or gas. Condensate surges into the unit can impair the function.
•
In the event of leaks, shut off the compressed air supply immediately and eliminate the cause in order to
maintain safe and cost-effective operation.
