Beko BEKOMAT 33iU Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 68

background image

2. Safety

2.1 Use

The

BEKOMAT

®

33iU / 33iU CO

, also referred to the following as product or

BEKOMAT

®

, is an electronically level-

controlled condensate drain used for discharging condensate in pressurised systems. The

BEKOMAT

®

is able to drain

condensate at operating pressure with no pressure loss.

2.1.1 Intended use

Any use of this system other than the use described in this manual is hereby deemed to be non-intended and can cause a
hazard for the safety of people and the environment.
The following must be noted for intended use:
•  Read and follow the manual.
•  Only use the product and the accessories in indoor areas.
•  Only use the product and accessories within the operating parameters given in the technical data and the agreed

delivery conditions.

• Only operate the product and accessories with media which are free of caustic, aggressive, corrosive, toxic,

flammable, oxidising or inorganic components.

In cases of doubt an analysis must be carried out.

• Only use the product and accessories in surroundings where splash water is the maximum possible water exposure

that can occur. The splash water must be free of corrosive components.

• Only use the product and accessories in areas which are free of toxic and corrosive chemicals and gases.
• Only use the product and accessories within the piping system designed for the technical data with appropriate

connections, pipe diameters and assembly clearance.

• Only use the product and accessories outside potentially explosive atmospheres.
• Only use the product and accessories away from direct solar radiation and heat sources as well as areas subject to

frost.

• Only combine the product and accessories with the products and components named and recommended by

BEKO

TECHNOLOGIES in the manual.

• Adhere to the prescribed maintenance schedule.

Before using the product and the accessories, the operating company must make sure that all conditions and
prerequisites for intended use are given.

The product and the accessories have been exclusively designed for stationary use in a commercial or industrial area. All
of the assembly, installation, operation, maintenance, disassembly and disposal work described may only be performed

by qualified skilled technical personnel.

BEKOMAT

®

33iU / 33iU CO

Original installation and operation manual

6 | 68

«
...
4
5
6
7
8
...
»

Содержание BEKOMAT 33iU





































































Отзывы:

Нет отзывов

Похожие инструкции для BEKOMAT 33iU

Бренд: DARAY Страницы: 24

Бренд: Jafar Страницы: 9

Бренд: YSI Страницы: 70

Бренд: jcb Страницы: 41

Бренд: Panasonic Страницы: 180

WJHD100 - DIGITAL DISC RECORDE

Бренд: Panasonic Страницы: 7

Бренд: idiag Страницы: 12

Бренд: Tabi Страницы: 8

Бренд: Dabi Atlante Страницы: 102

Бренд: Ocmis Irrigazione Страницы: 100

Бренд: Haas Страницы: 12

Бренд: SaMASZ Страницы: 25

Бренд: Ultrawave Страницы: 30

Бренд: Ultrasound Technologies Страницы: 12

bionic power knee

Бренд: Össur Страницы: 2

BALANCE KNEE OM8

Бренд: Össur Страницы: 36

Бренд: Össur Страницы: 37

REBOUND DIABETIC WALKER

Бренд: Össur Страницы: 63

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды