Beko BEKOMAT 16 CO Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 60

background image

7. Electrical installation

7.1 Warning notices

DANGER

Use of incorrect spare parts, accessories or materials!

The use of incorrect spare parts, accessories or materials, as well as auxiliary and operating

materials, may result in death or serious injury. Malfunction and device failure as well as

material damage can occur.
• For all work, only use undamaged original parts, auxiliary and operating materials which

are specified by the manufacturer.

• Use only the approved materials and suitable tools for the respective purpose and make

sure that they are in proper working order.

DANGER

Electric voltage!

There is a danger of death or serious injuries as well as malfunction and device failure

following contact with components which are in contact with electric voltage.
• Only carry out installation, maintenance and repair work on the product and accessories

when they have been disconnected and secured against being switched back on again.

• Set up a safety area around the working area during all installation, maintenance and

repair work.

• For installation of the device, adhere to all applicable regulations (e.g. VDE 0100 / IEC

60364/ ATEX).

• Connect the protective conductor (earth connection) according to regulations.

WARNING

Insufficient qualification!

Insufficient qualification of the personnel carrying out work on the product and accessories

can lead to accidents, personal injury and damage to property as well as impair operation.
• All work on the product and the accessories may only be carried out by skilled technical

personnel - electrical engineering.

CAUTION

Inappropriate electrical installation!

Inappropriate electrical installation of the product and the accessories can lead to personal

injury and damage to property as well as impair operation.
•

Check all plug-type connections for a correct fit.

• Avoid stumbling hazard through appropriate cable routing.

• Avoid mechanical load on the cables through appropriate cable routing.

BEKOMAT

®

16 CO

Original installation and operation manual

24 | 60

«
...
22
23
24
25
26
...
»

Содержание BEKOMAT 16 CO





























































Отзывы:

Нет отзывов

Похожие инструкции для BEKOMAT 16 CO

Бренд: Raymarine Страницы: 464

Бренд: 3M Страницы: 8

Бренд: ZOLL Страницы: 3

Бренд: UNIA Страницы: 62

Бренд: Califone Страницы: 7

Бренд: CALITEK Страницы: 16

Бренд: LAHTI PRO Страницы: 20

Бренд: LAHTI PRO Страницы: 16

Бренд: J&M Страницы: 53

Бренд: Qazqa Страницы: 2

Бренд: ParaBody Страницы: 5

Бренд: Nektar Страницы: 12

Бренд: Uchida Yoko Страницы: 40

Бренд: TC Electronic Страницы: 14

Бренд: Access Страницы: 7

Бренд: Yamaha Страницы: 48

Бренд: Vaisala Страницы: 2

NTP TECHNOLOGY DAD Thunder Core 256

Бренд: DAN Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды