Beko BEKOMAT 16 CO, Оригинальное руководство по установке и эксплуатации

Страница: 19 / 60

5. Transport and storage
WARNING
Insufficient qualification!
Insufficient qualification of the personnel can lead to accidents, personal injury and damage to
the device as well as impairments in operation during work on the product.
The work on the product described below may only be executed and documented by skilled
technical personnel - transport and storage.
CAUTION
Inappropriate transport or storage!
Inappropriate transport or storage may result in personal injury or damage to the device.
• Wear protective gloves when working with packaging material
• Use personal protective equipment, inspect it regularly for faultlessness and functionality
and replace damaged parts immediately.
• Handle packaging and product with care.
• Pack all parts impact-proof using suitable material.
• Transport and handle the packaging according to the markings (observe lifting gear
attachment points, the centre of gravity and orientation e.g. keep vertical, do not throw etc.).
• Use proper means of transport and lifting equipment that is in proper working order.
• Always adhere to the specified transport and storage parameters.
• Store the product only outside of areas exposed to direct sunlight and heat sources.
NOTE
Handling packaging material!
Inappropriate disposal of packaging materials can cause environmental damage.
• Dispose of the packaging material in accordance with the regional laws, provisions,
guidelines and regulations of the country and place of use.
5.1 Transport
After transporting and removing the packaging material, inspect the product for possible transport damage. If you
detect any damage, immediately notify the carrier company and
BEKO TECHNOLOGIES GMBH or one of its agents.
Transport the product as follows:
• Only transport the product packaged.
• Handle packaging and the product with care.
• Note the transport weight specification and marking on the packaging.
• Secure the packaging and the product against slipping and falling during transport.
5.2 Storage
Store the product and the accessories as follows:
• Adhere to the storage conditions in chapter
“4.2 Storage and transport parameters” on Page 15 .
• Store in a closed, dry as well as frost-free room.
• Store protected from external influences of the weather, direct sunlight and sources of heat.
• Secure against falling over and protect against vibrations at the storage location.
Original installation and operation manual BEKOMAT
®
16 CO
19 | 60