Beko Bekomat 14 Скачать руководство пользователя

Страница: 7 / 64

2.3 Target group and personnel

This manual addresses the personnel listed below who are involved with work on the product or the accessories.

INFORMATION

Personnel requirements!

The personnel may not execute any actions on the product or the accessories when they are

under the influence of drugs, medications, alcohol or other substances that may impair their

consciousness.

Skilled technical personnel - transport and storage

Skilled technical personnel - transport and storage are people who, due to their training, professional experience and

qualifications, have all the necessary skills to safely execute all actions in connection with the transport and storage of

the product, to instruct, to recognise possible dangerous situations independently and to execute measures to avoid

danger.

The capabilities include, in particular, experience with hoists, forklifts and lifting equipment and knowledge of local

laws, standards and guidelines relating to transport and storage.

Skilled technical personnel - compressed gas technology

Skilled technical personnel - compressed gas technology are people who, due to their training, professional experience

and qualification, possess all the necessary capabilities to safely execute actions, and instruct all actions related to

compressed gases and pressurised systems, to independently foresee potential hazardous situations and implement

appropriate measures to avert any danger.

The capabilities include, in particular, experience in handling measurement and control technology as well as

knowledge of the regionally applicable laws, standards and regulations for compressed gas technology.

Skilled technical personnel - electrical engineering

Skilled technical personnel - electrical engineering are people who, due to their training, professional experience and

qualification, have all the necessary capabilities to safely execute all actions related to electricity, to instruct and to

independently foresee potential hazardous situations and take appropriate measures to avoid any danger.

The capabilities include, in particular, experience in handling electric voltage plants, measurement and control

technology as well as knowledge of the regionally applicable laws, standards and regulations (e.g. VDE 0100 / IEC

60364/ ATEX) applicable for handling electrical technology.

Skilled technical personnel - customer service

Skilled technical personnel - customer service are people who have the skills and qualifications of the skilled personnel

named above. Skilled technical personnel - customer service must have documented proof of training for all work on

the product and be authorised.

Original installation and operation manual

BEKOMAT

13, 13 CO, 13 CO PN25, 13 CO PN40

7 | 64

Содержание Bekomat 14

































































Результаты поиска

Содержание Bekomat 14

Отзывы:

Похожие инструкции для Bekomat 14

Бренды по названию

Популярные бренды

Beko Bekomat 14, Оригинальное руководство по установке и эксплуатации

Результаты поиска

Содержание Bekomat 14

Отзывы:

Похожие инструкции для Bekomat 14

Бренды по названию

Популярные бренды