Beisler 1280-7, Руководство по эксплуатации, Страница: 195 / 214

Setup
Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023 193
9. Tighten the screws (6).
10. To align the upper delivery table (2), repeat the steps 7. to 9.
Important
Move the delivery table (2)/(3) on both sides at the same time to keep it
from slanting.
7.9 Assembling the clamping stacker tray extension
(optional)
Fig. 155: Assembling the clamping stacker tray extension
By default, the base model machine is equipped with the dual tray (3)
for the clamping stacker (2). An additional arm can be added as a tray
extension (6) if the sewing material is large/long.
To assemble the tray extension:
1. Slide the tray extension (6) onto the holder (1).
2. Set the tray extension to the desired distance.
• The minimum/maximum distance is preset by the slot (4).
3. Use the lever (5) to lock the tray extension (6) in place on the holder (1).
(1) - Holder
(2) - Clamping stacker
(3) - Dual tray (4) - Slot
(5) - Lever
(6) - Tray extension
④
⑥
① ②
③
⑤