Beisler 1280-7 Скачать руководство пользователя страница 113

Страница: 113 / 214

Programming Commander Pro

Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023

111

5.11 Login/Logout

To access Login/Logout:

1. Press the symbol

to bring up the navigation pane.



This opens the navigation user interface.

Fig. 91:

Login/Logout

2. Press

Logout

(1).



This opens the Login user interface (2).

Information

If logged out, the user can log back into the system at any time by entering
the username:

user

(no password required).

There are two login options. You can toggle between the

Default User

and the

Technician

user level:

•

Username:

user

Password: -

•

Username:

technician

Password:

25483

Login with username and password

To log in with username and password:

1. Enter

username

and

password

2. Press on the symbol



If the login information is correct, the user will be logged in.

(1) - Logout

(2) - Login user interface

①

②

Содержание 1280-7























































































































































































































Результаты поиска

Содержание 1280-7

Отзывы:

Beisler 1280-7, Руководство по эксплуатации, Страница: 113 / 214

Результаты поиска

Содержание 1280-7

Отзывы: