Page 6
To set the date and time, proceed as follows:
1) Use the RIGHT and LEFT buttons to select day, month, year, hour, minutes.
2) Use the ENTER button to find the desired day, month, year, hour, minutes.
Note. In case of blackout the BX308xp, the set data are not lost.
If the backup clock battery is too low, you will get this error message “Err. bat. Clock” during the warmup phase.
EXIT button
To exit the program, select “ Return Arrow ”.
Date and Time Setting
Probe Setting
Inserting or Disconnecting Probes, and Selecting the Type Gas, Explosive, Toxic, and Oxygen
Pressing the DOWN button starts blinking the probe 1, each time you press the "ENTER" button, a rectangle will appear
with the text:
Activation/deactivation of probes, and type of gas selection: Explosive or Toxic
Press DOWN to get probe 1 blinking.
Now, each time you press “ENTER” you will get the following box:
E, you have enabled a probe for explosive gas
T, you have enabled a probe for toxic gas
O, you have enabled a probe for oxygen gas
* you have disabled the probe
Use the RIGHT and LEFT buttons to select the desired probe, and repeat the operation outlined above.
This operation should be performed on all probes to be activated.
Use the arrow down to the right and press “ENTER” to access the setting program for the pre-alarm gas percentage.
Giù
Sù
SX
DX
ENTER
Date time
16/oct/2017 15:10
1 2 3 4 5 6 7 8
T * T O * * E T
T T T T E E E E
Configurazione sonde