Copyright © 2019 TTAAll Rights Reserved.
Product Introduction
14
Figure 12
Figure 13
Attention:
1) The difference between CCW arm and CW arm is different rotation direction of the
propellers which produce lift force. There is a mark arrow on every motor holder to
help differentiate. CCW arrow means CCW arm, you need to install the
CCW
propeller,otherwise it will be CW arm which you need to install the CW propeller.
2) There is a indicate arrow on the Dome which shows the heading direction.
3) According to the Figure 7, install CCW arm on M1 and M5, install CW arms on M2
and M4, install CCW Arm with LED on M3, install CW Arm with LED on M6.
4) Arm could only fold down instead of up during the installation,arm should be in an
horizontal level with ESC
2.3.3 Spraying Tube Installation
1) First, insert the Φ8 spraying tube into the three-way connector as Figure 14-1.
Second, go through the spraying tube from the tube holder as Figure 14-2. And then
insert the other side of the spraying tube into the one-way connector at the nozzle
place as Figure 14-4. Install the other spraying tube the same way.
2) It will be completed like Figure 14-3.
