Beijing Rongda innovation Technology RD-FH5C5 страница 9 Скачать руководство пользователя

Страница: 9 / 61

RD-KT247 thermal printers

9 / 61

FEED button: Click the button and the printer feed paper one line. Hold down the button and the
printer continuously feed paper.

1.3.2 Operation

1. self- test
Step 1:

The power of the printer is turned off.

Step 2:

Press the indicator button

Step 3:

Energize

the printer for about 2 seconds and the printer will start the self-test.

2. Load paper
Step 1:

Open the security lock of the printer, and open the printer’s cover.

Step 2:

Pull out the right wrench of the printer, and open the printer's creel.

Step 3:

Remove the printer’s paper axis and insert the roll paper. Then put the paper into the paper

storehouse, and get stuck the paper axis, and fasten the printer creel.

Step 4:

Pull out the paper end, and fasten the cover. End the loading paper.

3 Paper feed

Under the printer charged state, hold down the buttons, and the printing paper starts feeding.

1.3.3Indicator light

Power Light:
When the printer is powered, the indicator light is bright with green light for long.
Status Light:
When the printer lacks the paper, the indicator light will be in a state of continuous glint with green
light.

1.4 Appearance size and installation dimensions (Unit: mm)

Appearance size: feet inches length 135.5 mm * width 135.5 mm * depth 136.5 mm

Installation dimensions: length 127.5 mm * width 128.5 mm

Содержание RD-FH5C5






























































Результаты поиска

Содержание RD-FH5C5

Отзывы:

Похожие инструкции для RD-FH5C5

Бренды по названию

Популярные бренды

Beijing Rongda innovation Technology RD-FH5C5, Руководство пользователя

Результаты поиска

Содержание RD-FH5C5

Отзывы:

Похожие инструкции для RD-FH5C5

Бренды по названию

Популярные бренды