BeiJer H-T60 Series, Инструкция по установке и эксплуатации, Страница: 18 / 27

Operation
18
Beijer Electronics, MA00824
7.2 System Menu
Set the dip switch SW7 = ON . After the self-test, the system menu of the oper-
ator terminal is displayed on the screen:
The functions of the commands are briefly explained below:
System menu command Function
Link The operator terminal is connected.
F2 - Confg Sets up the internal time clock and communication
parameters in the operator terminal.
Use , , and to move to desired field; + and
- to set the value of the field.
F3 - Copy Copies application data to another H-T60.
F4 - Set Adjusts touch panel LCD contrast and clears data RAM.
See also section
6 LCD Contrast Adjustment .
F5 - Run Runs the application.