Installation
2.2.1
Mode Switches
All mode switches must be in OFF position during operator panel use.
The mode switches should not be touched unless by qualified personnel.
1 2 3 4
ON DIP
1 2 3 4
ON DIP
2.2.2
Connections to the Controller
For information about the cables to be used when connecting the operator panel to
the controller, please refer to the help file for the driver in question.
2.2.3
Other Connections and Peripherals
Cables, peripheral equipment and accessories must be suitable for the application
and its environment. For further details or recommendations, please refer to the
supplier.
Beijer Electronics, MAEN812E
10
