BEIER-Electronic SFR-1-HL Скачать руководство пользователя страница 23

Страница: 23 / 110

Double Sound Speed Controller SFR-1-HL

01.04.2021

BEIER-Electronic

Sounds for changing running steps / gears

If you use more than one running step/gear for your driving sound you can also use

sounds to simulate the changing between the different running steps/gears. When

you change the running step/gear the changing noise will be played.

Furthermore you can differentiate between acceleration- and deceleration sounds

and therefore use for example different sounds for changing the gear from FG1 to

FG2 and another for switching from FG2 to FG1.

The changing sound will always be played once and completely when the running

step/gear is changed. For this reason the sound should be short (e.g. 1 s).

Otherwise, it might occur for example that the model is already standing but the

changing sound is still played.

How to open sound files

In the folder “SFR-1-HL Sounds”, on the supplied DVD-ROM, you will find some

exemplary sounds for different vehicle types. In order to store a new sound on the

SFR-1-HL, start the program “SFR-1-HL Sound-Teacher", open a *.SFR-1-HL project

file (Menue “File”



Open project) in the respective folder and save the project files

on the SD-card.

The USM-RC-2 sound projects are compatible with the SFR-1-HL. To open a USM-

RC-2 file you have to change the shown data type to „All files (*.*)“.

To make your model unique, individual and realistic all sounds can be edited and

compiled individually, for example with the software Audacity.

For an easy start we recommend to use one of the ready sound projects and adapt it

to your requirements step by step.

Turning on/off engine sound

Before any engine sound is played, it must be switched on first.

There are different ways to switch on the engine sound:

Using a proportional channel (X2/3 - X2/8) to switch on engine sound:

If you have a joystick/slider/switch/rotary switch left, you can use it to switch the

engine sound on or off. Therefore the corresponding receiver ouput must be

connected to the corresponding proportional channel of the sound module with a

servo patch cable.

The proportional channel must be configured in the Sound-Teacher under

Configuration



Proportional channels



Function “Engine sound on/off“. If the

proportional channel is brought in this area (A –D), the engine sound is switched on

or off.

Содержание SFR-1-HL















































































































Результаты поиска

Содержание SFR-1-HL

Отзывы:

Похожие инструкции для SFR-1-HL

Бренды по названию

Популярные бренды

BEIER-Electronic SFR-1-HL, Руководство по эксплуатации

Результаты поиска

Содержание SFR-1-HL

Отзывы:

Похожие инструкции для SFR-1-HL

Бренды по названию

Популярные бренды