OVERDRIVE OD400
Ultimate Overdrive Effects Pedal
Thank you for showing your confidence in us by purchasing the BEHRINGER OVERDRIVE OD400.
This effects pedal is ideally suited for electric guitars, which need a boost in order to overdrive a
subsequent amp. Thanks to its high-performance features you can create state-of-the-art overdrive
sounds for almost any application.
1. Controls
(1)
The
LEVEL
control adjusts the output level.
(2)
The
TONE
control allows you to shape your overall sound.
(3)
The
DRIVE
control adjusts the amount of the overdrive/distortion effect.
(4)
The
ON/BATT
LED illuminates when the effect is activated. It also serves as a
battery level indicator.
(5)
Use the footswitch to activate/deactivate the effect.
(6)
Use this 1/4" TS
IN
connector to plug in the instrument cable.
(7)
The 1/4" TS
OUT
connector sends the signal to your amp.
Use the
DC IN
connection to plug in a 9 V power supply (not included).
The
BATTERY COMPARTMENT
is located underneath the pedal cover. To install or replace the 9 V battery
(not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to
scratch the unit.
◊
The OD400 has no on/off switch. As soon as you insert the plug into the in connector,
the OD400 is on. When not in use, remove the plug from the in connector. This extends
the life of the battery.
The
SERIAL NUMBER
is located at the underside.
(1)
(2)
(7)
(3)
(4)
(6)
(5)
