Behringer EUROGRAND EG2280USB, Руководство пользователя

Страница: 11 / 32

11
EUROGRAND EG8280USB/EG2280USB User Manual
5. Advanced Operation
The following chapters provide information on advanced operating functions of
the EG2280USB/EG8280USB.
5.1 Using EDIT mode
Many advanced operating functions of the EG2280USB/EG8280USB are available
in EDIT mode. The following sections describe how to adjust these functions in
EDIT mode.
◊ Whenever you are prompted to enter EDIT mode, please follow the
step-by-step instructions given below to select a function and adjust
its parameters.
1) Keep pressing the MODE button in the TEMPO/EDIT MODE section until the
EDIT MODE LED lights up.
2) Scroll through the functions using the Down/Up buttons, until the
appropriate function (e.g.
E1
) has been selected.
3) Use the -/NO- and +/YES buttons in the VALUE/SONG section to adjust the
value of your choice.
5.1.1 Quick access to layer mode functions
Use the following operating procedure for direct access to the layer mode
menu pages.
1) Press and hold down the two sound buttons selected for layer mode (e.g. GRAND
1 and STRINGS) and press the MODE button in the TEMPO/EDIT MODE section.
The EDIT LED lights up and the EDIT page
E3.1
is displayed.
5.2 Transposition
The sounds produced by the EG2280USB/EG8280USB can be transposed up
or down by half-tones (key by key). This is useful, for example if you want to
play a piece in a key that is easier to play because it has few or no accidentals
at all (e.g. C major), but intend the piece to sound in a difficult key with lots of
accidentals (e.g. D flat major).
Example: D flat major has five flats (accidentals). In this key you would have to
play a lot of black keys. However, if you transpose the sounds up by one half-tone,
you can easily play the piece on the white keys (C major). It can be helpful to
transpose the keyboard by an octave (12 halftones), for example to play low notes
in the middle register where they can be played more comfortably.
1) Press and hold the TRANSPOSE button and use the -/NO and +/YES buttons
in the VALUE/SONG section to adjust the transposition value of your choice in
half-tone steps.
The display reads:
0:
No transposition (default setting)
1 ... 12:
Keyboard is transposed up by the number of
half-tones selected.
-1 ... -12:
Keyboard is transposed down by the number of
half-tones selected.
2) Release the TRANSPOSE button when the desired value has been selected.
◊
The LED above the TRANSPOSE button lights up when the transposition
feature is active, i.e. when a value other than zero has been set.
◊
If a transposition interval has already been set, you can enable/disable
the transposition function using the TRANSPOSE button.
+
+