ECHO MACHINE EM600
Ultimate Echo Modeling Effects Pedal
Thank you for showing your confidence in us by purchasing the BEHRINGER ECHO MACHINE EM600.
This ultimate stereo Echo Modeler delivers the whole range of analog, tape and digital delay effects.
Create any sound from vintage tape-based echo over warm analog BBD delay sound to clean
high-fidelity digital delay.
1. Controls
(1)
The
MIX
knob is used for setting the
level of the delays.
(2)
The
REPEAT
knob determines the
number of delays.
(3)
The
TIME
control adjusts the
delay time. The length of time
depends on the selected program.
The delay time indicates how fast the
signal repetitions will follow after the
original signal. Low settings allow
to use the unit as a chorus or flanger.
Alternatively, you can tap the tempo
with the footswitch. Turning the
control overrides tap tempo settings.
(4)
With the
MODE
knob, you can select
one of several delay modes:
(1)
(9)
(4)
(11)
(6)
(8)
(7)
(5)
(10)
(2)
(3)
(5)
The
ON/BATT
LED illuminates when the effect is activated. It also serves as a battery level indicator.
(6)
Use the footswitch to activate/deactivate the effect. If you depress the pedal for more than
two seconds, you are able to enter a tempo by tapping the pedal several times in time with
the music. Depressing the pedal again for more than two seconds quits the tempo input mode.
(7)
The 1/4" TS connectors (
IN A/IN B
) connect to your instrument. Use IN A for mono applications and
both IN A and IN B if you have a stereo signal source, such as another effects unit.
(8)
The two 1/4" TS connectors
OUT A
and
OUT
B
send the signals to your amp. Use both connectors if
you want to achieve a full stereo delay effect. For mono use simply plug in OUT A.
(9)
With the
MOD
knob, you can add a nice modulation effect to your delays (TYPE switch position:
ANALOG = Vibrato; DIGITAL = Chorus; TAPE = Wow and flutter).
(10)
The
TYPE
switch allows you to choose from different classic delay characteristics,
ranging from TAPE (delays with subtle high-frequency damping), DIGI (high-quality delays)
to ANALOG (dark and slightly distorted delays).
(11)
With the
TRAILS
switch, you can prevent delays from being cropped when bypassing the effect.
Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included).
The
BATTERY COMPARTMENT
is located underneath the pedal cover. To install or replace the 9 V battery
(not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to
scratch the unit.
