Distortion Modeling Effects Pedal
Thank you for showing your confidence in us by purchasing the BEHRINGER DISTORTION MODELER DM100.
This high-quality modeling effects pedal provides electric guitars with state-of-the-art distortion sounds
of the most legendary pedals. It features a mode switch that lets you choose between these renowned
distortion simulations and achieve the right tone for any situation.
1. Controls
(1)
Use the
MODE
switch to chose between the three different distortion simulations.
DS1
provides
a hard distortion that reproduces the subtle nuances of your playing dynamics. With
D+
you can
achieve everything from retro-style soft-clipped distortion to classic fuzzy tones.
RAT
delivers fat
smooth distortion with a whole lot of sustain and cut-through power.
(2)
The
DIST
(ortion) control adjusts the amount of distortion effect.
(3)
The
TONE
control allows you to shape your overall sound.
(4)
The
LEVEL
control adjusts the output level.
(5)
The
ON/BATT
LED illuminates when the effect is activated. It also serves as a battery level indicator.
(6)
Use the footswitch to activate/deactivate the effect.
(7)
Use this 1/4" TS
IN
connector to plug in the instrument cable.
(8)
The 1/4" TS
OUT
connector sends the signal to your amp.
Use the
DC IN
connection at the front of the unit to plug in a 9 V power supply (not included).
The
BATTERY COMPARTMENT
is located underneath the pedal cover. To install or replace the 9 V
battery, press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.
◊
The DM100 has no on/off switch. As soon as you insert the jack into the in connector,
the DM100 begins running. When not using the DM100, remove the jack from the
in connector. This extends the life of the battery.
The
SERIAL NUMBER
is located at the bottom.
(1)
(8)
(5)
(4)
(7)
(6)
(3)
(2)
DISTORTION MODELER DM100
