CHORUS ORCHESTRA CO600
Thank you for showing your confidence in us by purchasing the BEHRINGER CHORUS
ORCHESTRA CO600. This ultimate effects pedal is designed to suit almost any style of
music you can think of. Thanks to its high-performance features you get a thick and
orchestral stereo chorus effect.
The chorus effect adds a shifting detuned signal to the original, similar to playing in
unison in a group of instruments, and it is often used for dispersing sounds.
1. CONTROLS
Top view
The LEVEL control adjusts the effect sound level.
The RATE control determines the chorus effect speed.
The HIGH control lowers the amount of high frequencies in the effect signal.
The LOW control lowers the amount of ultra-low frequencies in the effect signal.
Turn up the DEPTH control to achieve a fuller and deeper effect sound.
The ON/BATT LED illuminates when the effect is activated. It also serves as a
battery level indicator.
Use the footswitch to activate/deactivate the effect.
Use this 1/4" TS IN connector to plug in the instrument cable.
The two 1/4" TS OUT A and OUT B connectors send the signal to your amp. Use
both connectors if you want to achieve full stereo chorus effect. For mono use
plug in OUT A only.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or
replace the 9 V battery (not included), press the hinges with a ballpoint pen and remove
the pedal cover. Be careful not to scratch the unit.
The CO600 has no on/off switch. As soon as you insert the plug into the IN
connector, the CO600 is on. When not in use, remove the plug from the IN
connector. This extends the life of the battery.
