F-
20557-6
TECHNICAL INFORMATION 70124
Rev. 4-24-17 12-12-07
Magnum Painted Kennel
CUSTOMER SERVICE CENTER
PO Box 569
Columbus, NE
68602-0569
Ph: 800-447-2751
Fax: (402) 563-7447
www.behlencountry.com
Hardware Kit
38900117
THANK YOU FOR PURCHASING THIS PRODUCT
Behlen Country has been in the business of providing quality equipment for more than 80
years. Our equipment will provide many years of service when maintained by the owner and
used in accordance with the capabilities of the product. For questions about this product, or
for parts inquiries, please contact our Customer Service Center listed below.
NOTE:
Bottom of kennel has
1½” clearance to ground.
Do
NOT
install plugs in
bottoms of panels or door to
prevent holding water.
Typical Plug Installation.
Insert plugs in top (only) of
kennel panels and door at
circled locations as shown
at left.
Typical Dog Kennel Setup
The Latch comes installed
from the factory but may be
adjusted to any height by
loosening the nut, adjusting
to desired height and re-
tightening the nut.
TYPICAL CLAMP
SETUP
To attach panels,
one side of the
clamp will have
to be inserted
between the wire
and the vertical
tube before the
other side of the
clamp can be
attached. A clamp
should be attached
(as shown at left)
one at the top and
one at the bottom
of each panel.
LATCH COMPONENTS
Part No.
Description
Qty.
2208055
Latch, U-Clamp
1
2208056
Latch, Flipper
1
2688056
Nut
1
1328314
Bolt
1
