F-21028-1
TECHNICAL INFORMATION 70171
Rev. 8-7-20 8-21-13
1
2
3
4
5
6
7
Hitch`N Plow
®
80119995
CUSTOMER SERVICE CENTER
PO Box 569
Columbus, NE
68602-0569
Ph: 800-447-2751
Fax: (402) 563-7447
www.behlencountry.com
Hardware Kit
80900350
THANK YOU FOR PURCHASING THIS PRODUCT
Congratulations on your purchase. Behlen Country has been in the business of providing
quality equipment to landowners for more than 80 years. Our equipment will provide many
years of service when maintained by the operator and used in accordance with the capabilities
of the product. For questions about this product, or for parts inquiries, please contact our
Customer Service Center listed below.
WARNINGS:
• Not intended for highway use.
• Keep hands away from Hitch`N Plow
during operation.
• Keep people at a safe distance away from
the Hitch`N Plow and implement during
operation.
• Do not operate implement in reverse.
• Do not install/operate on the front of the
vehicle.
• Do not wire winch into the trailer power
socket. Current draw of winch exceeds
allowable current on this circuit.
• Do not lift any implement more than 500
lbs. with the Hitch`N Plow.
• Do not exceed vehicle hitch weight rating.
Attaching Winch to Hitch`N Plow
1)
Bolt winch (not included) to Hitch`N Plow frame
using bolts provided (Item 4). If rollers are included
with your winch, remove them and center winch
on the Hitch `N Plow bracket. (The rollers are not
required for Hitch`N Plow use.)
2)
Wire winch per instructions in the winch manual.
Wire directly to the vehicle battery using gator clamps
and additional wire (purchased separately) to reach
from the hitch to the vehicle engine compartment.
TOP VIEW
BOTTOM VIEW
Use these holes
to attach winch
to hitch frame.
No.
Description
1
Hitch`N Plow frame
2
Eyebolt ½” x 6” w/Nut
3
Lynch pins (2)
4
Winch bolts (2) 5/16” x 3” NC
w/Washers & Nuts
5
Top link pin ½” x 4¼” w/Washers &
Cotter Pin
6
Pulley
7
Retainer plates (2)
Attaching Hitch`N Plow to Vehicle
3)
Insert Hitch`N Plow into 2” receiver on vehicle.
Insure hitch receiver pin (standard equipment for
hitch receptacle) is installed to hold hitch in place.
