P
A G E
|
6
B e e S e c u r e
|
L
O
R
A
( H
E L I U M
)
T
R A C K E R
G
E T T I N G
S
T A R T E D
Part D: Device Operation
i)
When stationary, the tracker will report its GPS coordinates and battery status once
every 24 hours. This is remotely configurable.
If the tracker is in a location with poor GPS reception such as indoors, the location
may be inaccurate, and you may experience reduced battery life.
ii)
When the tracker is bumped or starts to move, it will send its location information to
the app once every 2 minutes. This is remotely configurable. Please contact
BeeSecure.
iii)
Button Function:
a.
Short press: This forces the Lynx to send a transmission immediately. Useful
for testing if the tracker currently has coverage or not.
b.
3 Second press: Push and hold the button for at least 3 seconds but less than
10 seconds. The LED will start slowly blinking after 3 seconds, then release
the button. This resets the tracker, and it will re-join the network. Useful if the
tracker is behaving unexpectedly or you need to join a new network.
c.
10 Second press: Push and hold the button for 10 seconds. The LED will stop
flashing and stay on solid. Then you can release the button. This resets the
factory default settings and resets the tracker back into shipping mode. This
functionality can be disabled. Please contact BeeSecure for details.
iv)
A low battery alert will appear in the BeeSecure app if the battery is low. Note that
extreme cold temperatures could set off this alert prematurely.
Part E: Track Your Assets
Track your BeeSecure-Guarded Assets
i)
You can customize the notifications you receive from your asset trackers via the
‘ASSETS’
→
‘LISTING’
screen
–
click the settings icon (
) next to your asset
ii)
Under
‘Notifications’
you can:
a.
Enable/disable all notifications
b.
Set geofences
c.
Set low and high temperature alerts
d.
Adjust the notification interval for when you will be notified that your asset has
started moving.