BEER Uno Top Cold, Руководство по эксплуатации, Страница: 7 / 28

Beer Grill AG Beer Grill GmbH
Allmendstrasse 7 Tel. +41 (0)56 618 7800 Körnerstrasse 14 a Tel. +49 (0)71 61 659 876 info@beergrill.com
CH
– 5612 Villmergen
Fax +41 (0)56 618 7849 D
– 79539 Lörrach
Fax +49 (0)71 61 659 879 www.beergrill.com
Seite 7
i
4 Safety references
4.1 Electrical power
Switch off the appliance immediately in case of interruptions of power supply!
Any work carried out on the electrical units or utilities may only be performed in accordance
with electrical regulations by a qualified electrician or by a person instructed and supervised
by a qualified electrician.
Appliances and unit components which are subject to inspection, maintenance and repair
work have to be completely disconnected from the power source and free of voltage. First,
check as to whether the activated parts have indeed been disconnect-ed and are voltage-
free, then ground and short them out. Insulate any adjacent parts that are also energized!
4.2 Fundamental safety notes
•
The connection and any technical adaptations of the appliance must be carried out by
specialists.
•
This especially applies to any work on the cooling technology, electrical installation and
mechanical work.
•
Any alteration must be authorized by the manufacturer in order to maintain warranty.
•
Those covers bearing a warning may only be opened by specialists.
•
The appliances are not to be cleaned by water jet.
•
Protective covers and devices may not be removed due to risk of injury.
•
The control system may only be opened by an expert.
•
Air currents near the refrigerating unit resulting from improperly installed ventilation or
draughts are to be avoided, in order to ensure the efficient functioning of the refrigerating
unit.
•
The ambient temperature must not exceed 25 °C; the relative humidity not exceed 60 %
over an extended period of time.
•
Due to risk of injury, sharp objects are not to be stored loosely in the refrigerating unit.
•
Any glass parts are to be treated with the necessary care in order to avoid injuries result-
ing from broken glass.
•
Components and operating equipment may only be replaced by original parts.
•
Depending on the site of deployment, the sneeze screen may have to be checked for
conformity to regulations and adapted if necessary.
•
The manufacturer accepts no liability for damage or injury to persons caused by not ob-
serving the instructions and precautionary measures contained in this handbook.
In case of doubt, please contact the DEALER.
!