BEER Uno Top Cold Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 28

BEER Uno Top Cold Скачать руководство пользователя страница 19

Beer Grill AG

Beer Grill GmbH

Allmendstrasse 7

Tel. +41 (0)56 618 7800

Körnerstrasse 14 a

Tel. +49 (0)71 61 659 876

[email protected]

CH

– 5612 Villmergen

Fax +41 (0)56 618 7849

D

– 79539 Lörrach

Fax +49 (0)71 61 659 879

www.beergrill.com

Seite 19

10.6 Basic operation 1

10.7 Basic operation 2

Start quick cooling

Unlocking control panel

Setting desired temperature

Tap SET (setting desired temperature).

Use UP/DOWN keys to change temperature setting
(value blinks during setting mode).

SET: Store desired temperature.

Start manual defrosting

Press DEFROST for 3 seconds to start manual defrosting.

Press DEFROST for 3 seconds to stop manual defrosting.
The DEFROST symbol is displayed during defrosting.

Displaying an active alarm

Press QUICK COOLING for 3 seconds to start quick cooling.

"Pud" stands for quick cooling and is displayed for 3 seconds.
The quick cooling symbol is displayed during quick cooling.

Press QUICK COOLING for 3 seconds to stop quick cooling.

The temperature and alarm codes blink
alternatingly until the cause of the alarm
has been eliminated. The alarm bell is
displayed.

- The control panel will be locked after 5 minutes without activity (if P76= yes).

- If the control panel is locked, "LoC" will be shown on the display when any key

is pressed.

- Press UP and DOWN keys simultaneously for three seconds to unlock the

control panel. "unl" will then be displayed for 3 seconds.

«
...
17
18
19
20
21
...
»

Содержание Uno Top Cold





























Отзывы:

Нет отзывов