BEER Uno Top Cold, Руководство по эксплуатации, Страница: 12 / 28

Beer Grill AG Beer Grill GmbH
Allmendstrasse 7 Tel. +41 (0)56 618 7800 Körnerstrasse 14 a Tel. +49 (0)71 61 659 876 info@beergrill.com
CH
– 5612 Villmergen
Fax +41 (0)56 618 7849 D
– 79539 Lörrach
Fax +49 (0)71 61 659 879 www.beergrill.com
Seite 12
i
•
Heat radiation and illumination
The influence of heat radiation should by reduced to a minimum. Therefore do not place
the item in areas with direct solar radiation, close to non-insulated walls and roofs heated
up by solar radiation or other heat sources. Do not directly point spotlights to the Uno
Top Cold. Exposing Uno Top Cold equipment to heat reduces its cooling power and in-
creases operating costs.
8.2 Preparation at the installation site
•
Ensure that furniture cladding and counters are prepared according to the technical
specifications.
•
Compare the operating voltage on the type plate with the local voltage supplies before
you connect the device.
•
Customer fault-current circuit breaker min. 30 mA is in place.
•
Ensure that all supply lines are in place according to the specific data sheets (power,
water, wastewater).
Correct installation and commissioning of the device is a prerequisite for
trouble-free operation. The installation must comply with the local electrical,
safety and hygiene regulations.
Stainless steel is not totally resistant to substances containing chlorine or
acids. These may corrode the equipment's materials. The appliances must not
get in contact with such substances.
!