BEER Uno Top Cold, Руководство по эксплуатации, Страница: 11 / 28

Beer Grill AG Beer Grill GmbH
Allmendstrasse 7 Tel. +41 (0)56 618 7800 Körnerstrasse 14 a Tel. +49 (0)71 61 659 876 info@beergrill.com
CH
– 5612 Villmergen
Fax +41 (0)56 618 7849 D
– 79539 Lörrach
Fax +49 (0)71 61 659 879 www.beergrill.com
Seite 11
8 Installation of Uno Top Cold
8.1 Setting up and moving the device
•
Solid substructure
The devices are not self-supporting, that means, tabletop and built-in models need a
solid base for transport and installation with the dimensions corresponding to those of
the devices.
•
Lifting
Lifting the device (weight) off the pallet must at all costs be carried out with suitable
equipment.
•
Using a fork-lift truck
When using a fork-lift truck, it is imperative to ensure that the electrical power-supply
cable does not become wedged or damaged.
Always lift and transport the device from underneath on the longitudinal side with
assisting devices.
•
Moving
After every time the device has been moved, a visual inspection of possible damage to
the electrical cable must be made. In the event of damage, the device must not be
connected to the mains power supply.
•
Ambient temperature
The appliances are equipped with electronic controls and ventilation. Please take care
that no equipment with substantial emanations of heat, grease or steam (griddles, deep
fryers, bain-maries, etc.) are installed and operated nearby.
•
Built-in units
The appliances may only be installed by qualified and authorized experts.
When installing units in a niche or cut out of a table top you have to assure the airflow of
the forced air-circulation. For handling and thermal reasons we recommend the first
version.
•
Glasses
Ensure that all glasses are correctly positioned and placed.
•
Installation site and storage
The appliances contain electronic components that may not be stored in cold and humid
areas. Make sure that no condensate water can form during storage.
If an appliance has been out of service for a prolonged time and has been stored in a
cool or humid area, it must be thoroughly checked before restarting.
Contact with salt water is strictly forbidden. If an appliance is installed at a swimming
pool, it is essential to assure that the equipment does not get in contact with substances
containing chlorine or acids that may affect the anti-corrosive protection of the metal
construction.
In addition: - do not expose to any aggressive media
- protect from solar radiation
- avoid mechanical vibrations