BEER Beer Hot Cube, Руководство по эксплуатации, Страница: 13 / 26

13
10.4 Settings on the levels
+
Use the rotary switch (2) to set the desired bottom burner to between 1
– 12.
+
If necessary, use the toggle switch (3) to switch on the IR heater on top and the light.
+
On appliances with a heated shelf on the 2nd level, the rotary switch (4) can be used to set the
temperature of the displays 1
– 12.
+
The toggle switch (5) can be used to switch on the IR heating and the light.
+
On appliances with a heated shelf on the 3rd level, the rotary switch (6) can be used to set the
temperature of the displays 1
– 12.
+
The toggle switch (7) can be used to switch on the IR heating.
11 Cleaning
Afterwards we would like to give you some advice on maintenance, care, trouble shooting and service
of your warming device. The appliance must be cleaned inside and outside daily according to the hy-
giene regulations, because only this guarantees an optimal presentation of the goods.
Attention, the Beer Hot Cube is an electrical appliance. Before cleaning disconnect
the appliance of the mains (pull out plug/switch off main switch).
Allow the appliance to cool down to hand temperature first. Appliances may only cleaned with a damp
cloth and non-abrasive cleaning agents.
11.1 General recommendations
+
The appliance has to be cleaned daily.
+
After cleaning with special cleaners you have to wash all parts with clear water and dry them so that
there is no cleaner residue on these parts.
It is absolutely necessary to bear some fundamental things in mind to keep this stainless steel warming
device working and to maintain its long life. These are:
+
Always keep the stainless steel surface clean.
+
Make sure that there is always enough fresh air on the surface.
+
Never touch the surface with rusty material.