BEER Beer Cold Rack, Руководство по эксплуатации, Страница: 21 / 28

21
+
Never clean the rear or the bottom of the tub with a water hose or a scrubber. Avoid running water
near this areas.
+
All other surfaces can be cleaned with soft detergents or water.
+
If the condenser is dirty, clean it with a broom or a vacuum cleaner.
Attention , only work vertically, to avoid bending the lamellae!
Do not close or put any objects in front of the condenser openings for fresh air because
otherwise the refrigerating efficiency will be reduced.
After all cleaning has been completed the cooling device has to be returned to its orig-
inal state in order to guarantee efficient operation!
In addition to daily cleaning, service and maintenance of the cooling devices are
required to be carried out in regular intervals by qualified specialists.
12 Maintenance
12.1 Optimal product presentation
In order to guarantee efficient operation of the refrigerated well along with optimum presentation of the
goods, the entire technological equipment has to be checked and maintained regularly.
The following should be done:
+
Complete cleaning of the entire cooling unit.
+
Checking the ventilator for functionality.
+
Checking the thermostat setting.
+
Checking the temperature of the drop-in refrigerated well: The exhaust air temperature directly be-
neath and inside the rear ventilation channel must not be higher than 3°C.
+
Checking and cleaning the drainage lines, drip water container and drip water evaporation.
+
Checking the gas spring on the evaporator.
+
Cleaning the condensers on the cooling unit.
+
Checking the amount of refrigerant.
+
Making a security check of the unit.
We recommend to have your appliance serviced annually by a refrigeration expert. On
request we can provide you with addresses but you may also contact our customer
service.