Beem MIRAGE TORNADO CLEAN, Руководство пользователя

Страница: 23 / 48

21
EN Mirage Tornado Clean
BEEM - Elements of Lifestyle
Storage
If you do not intend to use the appliance
for a longer period of time, clean it as de-
scribed in the section Cleaning and care .
Store the appliance and all accessory
parts at a dry, clean and frost-free loca-
tion, which is protected against direct
sunlight.
You can wind the mains cable around the
hook (6) and (10).
Set the hook so that hook (6) faces up-
wards and hook (10) faces downwards. If
necessary, pull the hook slightly outwards,
turn it 180° and release it.
In order to save space, you can remove
the tube (7) with handle (5) and insert it
into the holder (12) (see image H).
Wind the mains cable and hang it on the
hook (10).
Troubleshooting
The following table helps in localising and remedying minor faults:
Fault Possible cause Remedy
The appliance does not
function after pressing the
on/off switch.
Plug not inserted in the
socket.
Insert plug.
Automatic circuit breaker in
electrical distribution board
tripped.
Switch on the automatic
circuit breaker again.
The automatic circuit
breaker in the electrical
distribution board trips.
Too many appliances connect-
ed to the same power circuit.
Reduce the number of
appliances on the power
circuit.
Appliance is defective.
Contact customer
service.
The appliance switches off
suddenly.
Plug has fallen out of the
mains socket.
Push the plug back into
the socket.
Vacuum performance is
inadequate.
Brush is clogged. Remove clogging.
Dust container full up. Empty dust container.
Dust container not correctly
inserted.
Insert dust container
correctly.
Filter is clogged. Clean filter.
NOTE
If you cannot resolve the problem with the steps described above, please contact ►
customer service.