Beem MIRAGE TORNADO CLEAN, Руководство пользователя

Страница: 22 / 48

20
Mirage Tornado Clean EN
BEEM - Elements of Lifestyle
Cleaning the dust container
Check the dust container (16) when emp-
tying each time, however at the latest eve-
ry 3 to 6 months. If you detect dirt, clean
the dust container as follows:
Remove the hand vacuum cleaner
‹
from the main body.
Press the release button (15) and
‹
open the lid (1).
Pull the release latch (14) outwards
‹
and remove the dust container.
Pull the filter out of the dust container
‹
(see image F1).
Empty the dust container (16), see
‹
image F2.
If necessary, clean the dust container
‹
as described in the section Cleaning
the filter .
Rinse the dust container with water
‹
and clean it with a slightly damp cloth.
Insert the filter back into the dust con -
‹
tainer.
Insert the upper part of the dust con-
‹
tainer into the hand vacuum cleaner
and subsequently press the lower part
tightly until it snaps in (see image G).
Close the lid (1) until it snaps in.
‹
Cleaning the filter
The finest particles in the air are filtered
before they are blown out of the appliance.
Check the
filter (17) and (18) every 3 to 6
months. If dirt is detected during checking,
clean the filter. Proceed as follows:
Remove the dust container from the
‹
appliance.
Pull the filter out of the dust container.
‹
Unlock the coarse filter by turning it
‹
clockwise and pull it off the fine filter
(see image F3).
Clean both filters with a brush. The
‹
filters can be rinsed with water (max.
40 °C). In the case of stubborn dirt,
clean the filter with a normal vacuum
cleaner.
Allow the filter to dry in the air for 24
‹
hours and insert it again when it is
completely dry.
Align the keyway on the fine filter and
‹
the recesses on the coarse filter with
each other and insert the fine filter into
the coarse filter.
Lock the filter by turning the coarse
‹
filter anticlockwise (see image F4).
Insert the filter back into the dust con
-
‹
tainer.
Insert the upper part of the dust con-
‹
tainer into the hand vacuum cleaner
and subsequently press the lower part
tightly until it snaps in (see image G).
Close the lid (1) until it snaps in.
‹