EN
34
For descaling we recommend the
BEEM premium descaler concentrate
. The ef
fi
cient,
food-safe and environmentally friendly BEEM
premium descaler concentrate
is
available from selected specialist stockists, via our website
www.beem.de
or from our
customer service department on request.
Descaling with the BEEM Premium Descaler Concentrate
1. Fill the water reservoir (
5
) up to the
MAX
marking (
11
) with a concentrate/water solu-
tion of no more than 1:20 (one part concentrate to 20 parts water).
2. Turn the control dial (
6
) to the highest temperature (
BOIL
) to switch on the device. The
control lamp (
8
) lights up. T
he solution starts boiling.
3. As soon as the solution has boiled, turn the control dial down to a lower temperature.
Let the solution take effect for a little while.
4. Allow the solution to run through the discharge tap (
9
) so that it is also freed of any
limescale residues (see the “Operation” chapter | “Operating the Discharge Tap”).
5. To rinse the device, allow two tankfuls of clear water to run through it. The device is
now descaled and ready to be used again.
Storage
Disconnect the device from the mains power when it is not going to be used for a
prolonged period. Clean the device again (see the “Cleaning and Care” chapter) to avoid
possible mould formation. Mould can cause spots and damage on the device that can no
longer be removed / repaired. Allow the device and all accessories to dry completely.
Store the device and all accessories in a dry, clean, frost-free place that is protected from
direct sunlight and cannot be accessed by children or animals.
Technical Data
Article number:
07123
Model number:
S2.3.17
Voltage supply:
230 V ~ 50 – 60 Hz
Power:
1500 W
Protection class:
I
Capacity:
max. 3 litres
07123_DE-EN-FR-ES-IT_A5_V1.indb 34
07123_DE-EN-FR-ES-IT_A5_V1.indb 34
18.06.2018 12:28:07
18.06.2018 12:28:07
